How Do I Use PoolProof?
PoolProof comes as a pre-mixed, ready-to-use liquid. It is compatible with all materials used in the normal maintenance of swimming pools,spas and commercial fountains, including saltwater pools and spas.
Use our Pool Calculator to estimate the number of gallons of water your pool holds and how much PoolProof you need or use the table below. Add the correct amount of material in your pool water to achieve a minimum of 36 ppm of boron. For the first application, mix 1 (one) gallon of PoolProof to every 3000 gallons of pool water, and mix 1/6 gallon to every 500 gallons of spa water.
PoolProof Usage Table
SHAKE WELL before pouring into pool over the top of one of the outflow jets while pump is operating. Rinse empty container with pool water and add to pool. Run pump to achieve complete turnover, then test the ph level. It should be 7.2–7.8.
Water loss from filter backwash, splash-out, rainfall draining or winterizing draw down will reduce the amount of PoolProof. Use a Boron Indicator Test to maintain 36–50 ppm of boron and add product as needed. PoolProof does not evaporate and is not degraded by sunlight.
Winterization
A pool that has been treated with PoolProof will remain sparkling clear during the winter season with minimal effort. Before shutting the pool down for the winter, test the water to make sure that an adequate level of PoolProof is present, approximately 40 ppm.